 |
- Unscrew the top nut
- Remove the top
- Empty any remaining salt or pepper
- Turn the mill upside down and pop out the rod by tapping it firmly
against a hard surface
- Clean the mill with a dry brush or cloth.
- Push the rod back in from the bottom, making sure it goes through
the grinder ring until it pops into place
- Fill the mill with salt or pepper
- Put the top back on, MAKE SURE THAT THE METAL KEY CLICKS IN ON
THE ROD
- Screw on top nut while pushing up on the rod so it is flush with
the bottom of the grinding mechanism
- The tighter the nut, the finer the grind
WATCH
A VIDEO OF THE CLEANING PROCESS BY CLICKING HERE!
(Quicktime 7 or better required to view the video. Click
here to download the free plugin.) |
